To degree the temperature of the CPU, a sensor can be used, which we connect with the bottom of the heatsink with using adhesive tape and join the alternative stop to the relevant connector. If the temperature rises, we inform the machine and the cooling operation. Controls.

After putting in the motherboard, we have to be part of the wires from the the front of the case to the motherboard. Every one of those wires has a small connector on which their typical performance is written. The cord this is to activate the reset key is blue and white, and The phrase Reset is written on the connector. The white and pink wire for the LED‌ is tough power and the connector is written HDD HD. The pink and black wire whose connector is larger than the rest is for the speaker‌ inside the case‌. The green and white twine is for the LED. The inexperienced the front of the case‌, that is to expose the machine on and rancid, is attached to the motherboard. In ATX times, there may be every other t