It is important to check the TDS level in the water you drink. TDS basically means Total Dissolved Solids that are in the water. First, knowing what TDS for safe drinking water is ideal is necessary.

TDS consists of inorganic salts and some amounts of organic matter. The salts include magnesium, calcium and potassium, among others. Normal water which has flowed over rocks and terrain picks up these salts naturally. They get dissolved in the water as it flows along its course.

There seems to be some difference of opinion as to what TDS for safe drinking water is desirable. Some people like water with high TDS, and some people don't. However, to figure out what different levels of TDS do to water is where the answer lies.

Drinking water which contains very high TDS above 500 mg/L may not be safe for drinking. This means that the water contains very high salts and other organic matter levels. The latter could be a health hazard if it enters the body in large concentrations. The water with a high TDS level also tastes flat. This means that it is basically unable to quench thirst. Therefore, very high TDS levels for safe drinking water is a basic no. It is far better to drink water with an ideal TDS for safe drinking water, which may be summarised as follows -

TDS Level (mg/l)                                          Rating.

Less than 300                                                  Excellent

300 to 600                                                       Good

600 to 900                                                       Fair

900 to 1200                                                     Poor

Above 1200                                                    Unacceptable

Therefore the best TDS level in drinking water should be less than 300. It is also important to note that it should be a minimum of 100 at the lower end. Drinking water TDS levels should ideally be below 300 but not below 100. Higher levels of TDS cause the water to become 'hard', which essentially means that it does not taste good and, if used to cook, does not blend with food easily.

There are no bars on drinking water with a very high TDS except that the water tastes weird. However, hard water does have disadvantages, as anyone who has drunk it will know. The danger is the organic matter that might be part of the TDS. These may consist of microbes or other harmful elements which can cause harm. A high TDS level, unless accurately tested, might consist of a large quantity of these harmful elements. Therefore the TDS for safe drinking water should ideally be below 300 mg/l.

There are simple devices which anyone can use to check the TDS levels in the water. This can be used to see the TDS level in the drinking water. If the TDS levels are around 300 or below, then the water is ideal for drinking.

It is best to buy a known and reliable brand when buying packaged drinking water. These companies control quality and ensure that the TDS level of the water is 300 or below. This makes for the best TDS for drinking water.

Since having TDS levels at around 300 or lower makes for the safest drinking water, check the TDS levels of the company which produces the water. Check their website to see what the levels of TDS are in their products. It is essential to check TDS for safe drinking water.

Since water is an element which is consumed every day, the TDS levels are important. Safe drinking water is very important. Water that is not fit for consumption can lead to serious ailments.