Mini Trigger Sprayer Suppliers Introduces The composition principle of Mini Trigger Sprayer :

⒈ The dispenser is divided into two types: tie type and screw type. In terms of function, it is divided into spray, foundation cream, lotion pump, aerosol valve, and vacuum bottle.

⒉The size of the plastic pump head is determined by the diameter of the bottle body. The standard spray size is 12.5~24mm, and the water output is 0.1~0.2ml/time. It is generally used for packaging perfumes, gel water, and other commodities. The diameter is the same as the length received. It can be determined according to the height of the bottle body.

⒊The standard size of the lotion pump head is 16-38ml, and the water output is 0.28-3.1ml/time. It is generally used for cream and washing products.

⒋Special distributors such as foam pump heads and hand button sprinkler heads. The foam pump head is a non-air-filled hand pressure pump head, which does not need to be filled to generate foam. It only needs to press lightly to generate quantitative high-quality foam. Usually comes with a dedicated bottle. Hand button sprinklers are generally used on products such as detergents.

⒌The composition of the distributor is relatively messy, generally including a dust cover, tap head, tap rod, gasket, piston, spring, valve, bottle cap, pump body, straw, valve ball (steel ball, glass ball). Can be colored, can be electroplated, and can be set with an anodized aluminum ring. Because a set of pump heads involves many molds, and the order quantity is large, the minimum order quantity is 10,000 to 20,000, and the delivery period is 15 to 20 days after the sample is confirmed. White and general-purpose types are often in stock.

⒍The vacuum bottle is generally cylindrical, the standard is 15-50ml, and the single volume is 100ml. The overall capacity is small. It relies on the principle of atmospheric pressure, which can prevent cosmetics from forming pollution during use. There are anodized aluminum, plastic electroplating, and colored plastics. Quote It is more expensive than other general containers, and the general order quantity demand is not high.

⒎ Distributor customers rarely open their own molds, and they need more molds and higher costs.

Through the above introduction, Lotion Dispenser Pump Suppliers hopes that you can simply refer to the content of this article in future use.