This article was genuinely published "here" and copied with permission.

1. After gaining a lot of knowledge about the tile leveling system and its advantages. What is the purpose of such knowledge without practical application? In this article, we will educate you about using the best tile leveling system. Even though you brought the product, you should know how to use it. Then only, we can practically understand the theoretical benefit of the tile leveling system. Hence, given below are the basic steps that you should follow to install the tiles.

2. The first and foremost step is to prepare the surface well for the installation of the tiles. Mainly the purpose is to make the surface as flat as possible.

3. Take an adequate amount of tile adhesive to fix some tiles on the surface at a time.

4. Apply a sufficient amount of adhesive on the tile with the help of the proper tool and place the tile on the surface before strongly pushing.

5. The next task is to take two tile spacers and add them to each side of the exposed tile. Further, ensure that the base of the tile spacer is not placed below the added tile.

6. Now, carefully place the successive tile according to the spacers used in the previous tiles.

7. Considering the type of tile system you are using, slide the leveling wedges or clips into a hole that you will find on the top of the spacer. If you push them gently, you can ensure that the tiles stay leveled at a standard height.

8. If you don't know about the usage of wedges or clips, you can use caps in spite. Make sure to fit the caps on the top of the spacer and rotate them until you feel they are settled properly on the tiles. Observe the tiles carefully so as to ensure that there is no lippage.

9. Repeat the same step of adding more spacers but keep an eye on the alignment of the tiles even if you are caps, clips, or wedges.

10. Repeat this process until all of the tiles are placed perfectly, then leave the adhesive to dry. For expert advice, you can take help from product guidelines to figure out the time until which the adhesive is dried.

11. Once the adhesive is dried, you can now remove the tools you have used to align the tiles well.

12. Grout between the tiles, and you are done with the process.

However, if you are planning to purchase tile levelers or wedges, you can consider the products provided by "Acufloor." They are years of experience in the installation process and are equipped with innovative products. The products include leveling spacers, installation pliers, bubble spacers, EZ levelers, and many more.