To get back to the subject, how to improve efficiency, reduce scrap rate, and increase output in the transfer process, the custom-made dye sublimation paper manufacturer will explain to you what issues should be paid attention to during the stamping process of thermal transfer film. Keep the flower film clean, free of oil, fingerprints, dust, etc. Keep the workbench, guide rollers, buttons and other components of the machine clean and free of dust.

Keep the rubber head clean and free of dust and carbon deposits. In particular, regularly check whether the rubber roller is broken. If cracks occur, the pattern will be broken during the transfer process. Keep objects clean, free of dust, oil, etc. Especially plastic products, such as too much release agent, may cause the transfer fastness to decrease.

The hands of the operator should be kept clean, free of oil, sweat, stains or burns. The hot stamping temperature varies according to the glue and hot stamping film used in the hot stamping equipment. Some people always think that when the fastness is insufficient, the temperature will continue to rise.

This method is incorrect. Sometimes, different products require different temperatures. The hot pressing pressure must be adjusted to the most suitable level. If it is too large, the rubber head may be damaged, or even worse, the product may be burned. If it is too small, it will affect the hot stamping.

When adjusting to the most suitable position, please tighten the screws to avoid bending due to machine vibration during mass production. The hot stamping time (speed) should be determined according to the specific hot stamping. The faster the speed, the higher the production efficiency, but some products are restricted by some special conditions.

The A4 sublimation paper must be adjusted to the most suitable temperature, pressure and speed to print the most perfect product. Finally, remind everyone that in the process of heating the heat transfer machine, it is necessary to use the method of segmented heating. Otherwise, the silicone wheel is easily damaged. Sales in this market are still very expensive, and these consumables cannot be guaranteed. However, discarded rubber wheels should not be thrown away at will, some people will recycle them.