Descaling method of Stainless Steel Submersible Sewage Pump

　　Stainless Steel Submersible Sewage Pump scales after being used for a long time, especially the submersible pumps used in some cases of poor water quality, which are more prone to this problem. When the scale accumulates to a certain level, the speed of the water pump will slow down, resulting in a decrease in performance. Therefore, regular cleaning of the scale in the pump can ensure the normal operation of the pump. Let’s take a look at the cleaning method:

　　If the scale is immersed in oxalic acid, hydrochloric acid can also be used, but the concentration of hydrochloric acid must be controlled. If the acidity is too high, it will corrode the stainless steel submersible pump. If it is rust, you can lubricate with oil or use a pipe wrench. Of course not to put hydrochloric acid.

　　If the motor does not move, you can apply some loosening fluid to the bearing. After loosening, you can fill in some lubricant. This should happen without proper maintenance. When not in use for a long time, drain the water and store the desiccant in the pump. Add a little rust inhibitor to the water, the effect will be better. Scaling in the inner cavity of the Stainless Steel Submersible Sewage Pump is mainly caused by high water temperature. There is the scale at high temperatures. If there is a lot of scales, there will be no gap in the pump cavity and the pump will not move. Therefore, the circulating water should control the water temperature.

　　Here we introduce the cleaning method of the Stainless Steel Submersible Sewage Pump. There is no more and better way to clean the pump. The main thing is that everyone develops the habit of regular cleaning. Don't wait until the scale accumulates to a certain extent. Affect the operation of the submersible pump in the descaling process. When we use submersible pumps, we must give full play to their performance and improve pump utilization.

　　Small Submersible Pump is also our product, welcome to consult and purchase.