Small Drinking Water Pump Wholesaler introduces how to clean the pumping hose?

1. To clean the suction hose, you need to drain the internal water first, then pour a part of the white vinegar into the pipe, then turn on the automatic water pump, so that the white vinegar will enter the suction pipe to wash away some dirt-prone substances, and rinse repeatedly. Several times, this will dissolve the dirt, and then rinse the vinegar in the hose with clean water.
If it is a corrugated hose, you can shake the hose vigorously while running the water, and stretch the hose back and forth, preferably with hot water. If it is a corrugated hose, you can shake the hose vigorously while running the water, and stretch the hose back and forth, preferably with hot water. If it is a normal hose, just walk a few times in the pipe with a wire cloth ball. Too long pipes have to be chemically used, depending on the type of dirt, usually they can be soaked in a weakly acidic solution

2. If it is a normal hose, at this time, wipe it back and forth with a cloth ball of iron wire in the pipe.
Before cleaning the suction pipe, it is best to clean the water inside, and then clean it, otherwise the pipe will not be cleaned well.

3. The pitch of the pumping hose is very flexible. It has good flexibility to avoid blocking, and it will not be stiff when used. The whole pumping hose is light in weight, not only has good flexibility, but also has repeated bending. Performance, flexibility, etc. are good, this kind of tube is more flexible to use, and the effects of wear resistance and high temperature resistance are very good.
If a suction pipe is used at home, it is best to clean it every other time at this time, so that the effect will be better.