What inspection work should be done when using the wood chip machine?

 Recently, many customers have contacted us and asked us about the problems they encountered during the use of Electric Chipper Shredder. I hope we can help. Today I will discuss with you the knowledge about the use of wood chippers in these problems. Now, I hope to bring inspiration and help to our customers and friends, so that everyone has a deep understanding of the wood chip machine. In this way, everyone can know what they are in the process of using it in the future, and they can play the big role of the wood chip machine without rushing.
   1. The wood chip machine should be placed steadily, and the installation direction should be determined according to the actual situation of the site and raw materials. Generally, the small-size models do not need to make a foundation, and the user can directly power on the test machine to use.
   2. Before use, first check the circuit and oil circuit in accordance with the "Instruction Manual" to confirm whether the connection is safe. The tension of each chain, V-belt and transmission mechanism is generally adjusted when the equipment leaves the factory or adjusted on site by the factory installer , The user should always check in the future use process;
   3. The blade is made of alloy steel. After a long time of use, if there is wear or change the angle, the fastening screw of the blade can be loosened, and the blade can be removed for grinding and adjustment. If the wear is excessive, it should be replaced with a new blade of the same specification;
   4. When the Wood Splitter Manufacturer is connected to the power supply, it connects to the 380V three-phase power supply from the switch box or switch cabinet. First, check whether there are debris and branches around the equipment that affect the operation and operation. After the power is turned on, first determine the rotation direction of the feeding roller to make the equipment Run dry for about 5 minutes, and pay attention to listening and observing whether the equipment is abnormal.