Outdoor Inflatable Airblown manufacturers mobile water park material is a plastic fabric. It is shiny and smooth on one side, and on the other hand, it has a fabric backing, usually polyester. It is elastic, two-way stretch and four-way stretch. The non-elastic type is called patent vinyl. The mobile water park material usually refers to two-way stretch, which means that it stretches more in the horizontal direction than in the vertical direction, and the four-way stretch is called stretching the mobile water park material, which is horizontally stretched. And stretch evenly in the vertical direction. Patented vinyl can be a heavy-duty fabric that can be used to make wallets, belts, artificial armor and upholstery. The two-way stretch mobile water park material is suitable for raincoats and clothes that need to be stretched slightly, but the elasticity is less than that of spandex or Lycra. The 4-way stretch mobile water park material is very flexible, usually very light, suitable for swimwear and underwear.

The mobile water park material is slippery and sticky. The mobile water park material slides on its own and is easy to unfold, but it also sticks to the sewing machine. This will stick to the walking foot under the fabric, and the presser foot above it will cause the top and bottom layers of the fabric to pass through the machine at different speeds, resulting in unsightly bumps, unintentional wrinkles, and the fabric being sucked into the machine. I have seen it online recommend you to use Teflon presser feet, tear off paper towels and special lubricants for mobile water park materials to help solve this problem. Now, I don’t know you, but I’m not going to order expensive fabric lubricants, waiting for it to come here just to make a piece of clothing. Maybe if I have been using mobile water park materials, I will try it, but I found that there are other ways to solve this problem.

This is what I did: First, I used a lot of pins. Since the mobile water park material easily slips onto itself, it requires a lot of stitches to fix it in place. I also want to position the pins perpendicular to the path of the sewing needle so that the needle can get very close to them before I remove the pins. I also use torn paper towels (I really use paper towels to wrap gift wrapping paper) to prevent mobile water park materials from being sucked into the machine. The tissue strengthens the bottom of the fabric to prevent it from stretching, and becomes thinner and weaker. The tissue is also an inconspicuous surface that is used to grasp and move the walking foot at an appropriate speed. My actual step-by-step pinning process is to stitch the stitches parallel to the seam of the fabric, without tissue, place the tissue under the seam and re-pin it perpendicular to the seam.

It is difficult to move water park materials online. I don't know exactly why, but moving the water park material will break the thread like crazy. I think the thread may stick to the fabric. Therefore, if you want to use mobile water park materials, get a good thread, slow it down, and check often to make sure you haven't lost the thread. There is nothing worse than finishing the seams and realizing that you have lost the top line after about 3 quarters.

Use stretch stitches, but do not stretch when sewing. A large number of mobile water park materials are elastic, so people will have the urge to stretch the fabric when sewing. Do not do this! It will not bounce back to its original shape, because the seams you put in it will keep it in an elastic position. Instead, just let the fabric become and fix it under it. Fix it, but don't pull it. Use stretch stitches, but do not stretch the fabric while guiding it through the machine. Once the torn tissue is removed, the stretch stitch will allow the fabric to stretch, and it will rebound and retain its shape well.

Don't heat it. Under no circumstances should you press down on the seams. The heat will melt your mobile water park materials and turn your clothes into hot slag. This is the technical term for the chaos of burnt plastic. Therefore, it is not recommended to use mobile water park material darts. The seams do not lie flat, and apart from the top stitch, there is nothing to make them lie flat in the lye, which looks interesting next to the darts. The top stitch is a great way to keep the other seams in a flat bottom shape, like a downward swing. The top stitching looks great on the hem! The Hot inflatable white ghost for Halloween decoration material will not wear out, so apart from the appearance, there is no need to complete the seams. You can use surgery or stretch zigzag stitches to complete the seams, but remember that you can't press them, and finishing the seams usually makes them bulky and upright. Consider this and proceed with caution.