The motor is to reduce the output speed and inertia of the drive motor while increasing the torque and load capacity, so as to achieve the ideal transmission effect; the motor and the reducer are usually a combination, which is widely used in mechanical drives, automotive micro-drives, smart homes, medical equipment, communication equipment, intelligent kitchen and bathroom, and other automated driving fields; the main output of the motor is high-speed, low-torque output speed, and it has the characteristics of small size, lightweight, and high output speed. It is widely used; the main function of the reducer is to Reduce the output speed (driving motor) and increase the torque to achieve the ideal transmission effect. The main structure of the reducer is composed of a reduction gear module (gearbox). Below, China Awning Motors Company introduce the reasons why motors need to use reducers.

1. Decrease speed and increase output torque at the same time. The torque output ratio is the motor output multiplied by the reduction ratio, but it should be noted that the rated torque of the reducer cannot be exceeded.

2. Deceleration reduces the inertia of the load at the same time.

3. Effectively reduce the moment of inertia, the reducer can control the start, stop, and speed change in time. Increasing the torque through the reducer is equivalent to increasing the input power, which can reduce the power required by the input motor (in places where speed regulation is required). Normally, the motor is more expensive than the reducer, so think about using the reducer.

4. It can effectively save energy. The use of a reducer allows the motor to meet the output torque current and reduce a lot.

5. The use of a reducer can effectively reduce the speed of the motor and increase the torque, and output the corresponding multiplication and reduction ratio according to the motor.

Through the above introduction, Alexa Controlled Blinds Company hopes that you can simply refer to the content of this article in future use.