Are you encountering some issues while resolving a Toshiba laptop that won’t charger? If so, then must go through this content and then follow the steps instantly for resolving a Toshiba laptop that won’t charge. Also, must reach Toshiba Printer Repair Center in case of any issues.

Step 1: You need to first of all check if you are plugged in properly or not.

Sometimes, the charger not get inserted properly, so it is always suggested to look if the laptop and charger have been plugged in or not. If not, then you need to first of all, plugged in: you can also look at each contact point from the respective outlet to the respective AC adapter and the adapter to the respective laptop port.

Step 2: You are required to then confirm that if you are using the correct port or not.

You need to then check if you are properly using the correct port or not. If not, then you need to check if it has ported there.

Step 3: Next, you are required to then remove the battery by following the steps as follows:

• You need to first of all, remove any bolts or screws and then need to take out the battery carefully.
• After that, you need to then hold the power button for at least 10 to 15 seconds.
• Next, you are required to then plug the charger in and then have to finally power on your laptop.

Step 4: You have to then examine the power cords from any breaks or unusual bending carefully.

Step 5: After that, you need to then update the drivers by following the steps as follows:

• You need to first of all, give a right tap on the start menu for opening the Quick Access menu.
• Next, go to device manager and then need to go under batteries option.
• You are required to then open the drop-down menu quickly and then give a right tap on the Microsoft ACPI Compliant control method battery and then choose update driver quickly.

In case of any issues, reach Toshiba Repair Service Center Number right away.