Visit Ij.start.canon site to download the compatible ij.start canon drivers. Then, install Canon printer drivers downloads set up your device in a manner to copy, print, scan or fax. To avoid any error or issues during the Canon ij printer setup, you can undoubtedly follow the below-mentioned instructions for ij start canon.

Here's How To Get Started – ij.start canon

1- http//ij.start.canon webpage is needed to be open.

2- Https Ij Start Canon shows different options, hence select "Set Up."

3- Download Canon printer drivers.

4- Run the compatible Installation setup.  

5- Get started by connecting your Canon printer and PC, laptop or smartphone.   

How to download Canon printer drivers from ij.start.canon site?

Downloading Canon printer drivers and software takes a few minutes with a high-speed internet connection, follow below:-

1- Go to http://Ij.start canon

2- Access ij.start canon printer home page.

3- Click on "Setup (start here)" from the main menu.

You've two options here -

Either type your Canon printer model on shown box and click Go. Then, click "Start" and select the "connecting to a computer" tab.

Or, select the first letters of your model and click on the product name of your canon printer.

4- You are on the Canon printer drivers downloads page, therefore select an operating system like Windows.

5- Click Download to save the canon printer drivers, Software or Firmware file.

How do I install a Canon printer on my computer?

The process we will discuss here is using a USB cable. Here's a guide to installing Canon printer or PC or laptop:- 

1- Visit Ij.start canon or open https //Ij start canon to download the appropriate software.

2- Double-click to execute the ij.start Canon printer software package.

3- Click "Start Setup" to start the installation.

3- Accept the software license agreement.

5- When you see the connection type screen, select USB connection.

6- Once the printer connection screen prompts, take the USB cable and connect its one side into the printer's rear and the other side into PC or Laptop USB port.

7- Adjust the paper tray on your Canon printer model.

To complete the canon printer installation, Select "Align Print Head" and follow on-screen instructions to install additional software. 

How to Connect the Canon Printer Wirelessly using Ij.start.canon

Before starting the process, there are a few requirements that need to be fulfilled to use the WPS connection method. Visit ij.start.canon to connect your Canon printer model wirelessly with the network.

1- The router must have a WPS push button. You need to check with your router’s user guide for more details.

2- Your connection should be using the WPA or WPA2 protocol as almost every WPS-enabled network uses this protocol.

Step 1

Firstly, ensure that your ij.start.canon printer is turned on.

If the printer is turned on, the LED will be flashing green light.

You need to press the Maintenance button on your PIXMA printer and hold it for around 3-5 seconds.

Step 2

Then, you have to click on the Fit to Page tab.

Next, check if the LED flashes, and then go to your access point and hit the WPS button within 2 minutes. For more accurate details regarding the WPS button, you need to refer to the access point manual script.

Then, you will see that the blue Wi-Fi alarm lamp on your printer is flashing at the time you are searching for or making a connection with the access point.

After completing the wireless connection, the light will glow for around 3 seconds, then changes to "1". You need to check that the blue Wi-Fi alarm lamp is also glowing.

If you see any error codes flashing on the LED, kindly hit on the Colour or Black button to remove the error and simply repeat steps 1 and 2.

Particular error details - Error E, 2, 1.

This error displays when the wireless connection does not get established within 2 minutes after hitting the WPS button of your access point. To make sure of the proper connection setup, you need to follow these instructions from ij.start.canon.

1- Make sure if your access point is turned on? If it is already switched on, then turn it off, and again turn it on.

2-Also, this error shows when several WPS access points are encountered. In this case, you need to wait for some time, then set up the WPS again.

3- If you have multiple access points, you should press the WPS button on just one access point.

To start printing with Canon ij printer, simply open Document and adjust the setting of paper, printer quality, and more, thereafter press Ctrl + P or find the print option. To learn more, visit http ij start canon